Can support the NC tap center of a variety of producer type

  • Time:
  • Click:125
  • source:OURLOVE CNC Machining
Japanese brother industry will appear on the market on April 19, 2007 pillar movable type the top class type of NC tap center " TC-32BN QT " . This product ever held in November 2006 " JIMTOF2006 " aspirant travel crosses reference to exhibit. In the product group in, besides with before outside the norms that number of same cutting tool inventory is 26, still increased 40 norms, more easily working procedure is compositive machine with much breed. Use different equipment photograph to compare with every working procedure, many more compositive in an equipment working procedure can raise locomotive rate, reduce cost. This product basically is used at car assembly treatment. The fast feed speed of this product is 70mm/min, the acceleration of axis of X, Y, Z is respectively 1.

2G, 0.

9G, 1.

5G. Through raising the acceleration of main shaft, shortened cutting tool replaces time. Cutting tool is replaced to need only below the condition of 16000rpm 2.

1 second. Increasing refrigerant flow while, through changing the form of base, increased liquidity, facilitating eduction cuts bits. And depart through covering layer between treatment room and equipment room, can prevent to cut bits to enter equipment room. Reach pillar through improving cutting tool to deposit a part all round the appearance of covering layer, make safeguard more convenient, the mean time to repair when malfunctioning is former model only " TC-32B QT " about 50 ％ . The standard deploys USB interface. Can use U dish deferent data. In addition, still increased cutting tool library to retroflexion pushbutton with efficient replace cutting tool, raised maneuverability. Through can machining the function of speed according to machining appearance automata, still can undertake curved surface is machined. Optional match PLC. New product has main shaft two kinds of model that top rotate speed is 12000rpm and 16000rpm. Former price is 13.23 million yen when 26 cutting tool (contain tax) , 13.91 million 2500 yen are when 40 cutting tool (contain tax) . CNC Milling